Do it yourself (Setting up a PC)


Step 1

Unpack the monitor and computer case from the box. Remove any plastic covering or protective tape. Place the monitor and computer case on a desk or work area.

unpacking a computer

Be sure to place your computer case in an area that is well ventilated and has good air flow. This will help to prevent the computer from overheating.

Step 2

Locate the monitor cable. There are several types of monitor cables, so the one for your computer may not look like the one in the image below.

a VGA cable

If you’re having trouble finding your monitor cable, refer to the instruction manual for your computer.

Note: (If you have an all-in-one computer that’s built into the monitor, you can skip to Step 4).

Step 3

Connect one end of the cable to the monitor port on the back of the computer case and the other end to the monitor. If you’re using a VGA cable like the one in the picture below, you’ll want to tighten the screws on the monitor cable to secure it.

1

Many computer cables will only fit a specific way. If the cable doesn’t fit, don’t force it or you might damage the connectors. Make sure the plug aligns with the port, then connect it.

Step 4

Unpack the keyboard and determine whether it uses a USB (rectangular) connector or a PS/2 (round) connector. If it uses a USB connector, plug it into any of the USB ports on the back of the computer. If it uses a PS/2 connector, plug it into the purple keyboard port on the back of the computer.

1

Step 5

Unpack the mouse and determine whether it uses a USB or PS/2 connector. If it uses a USB connector, plug it into any of the USB ports on the back of the computer. If it uses a PS/2 connector, plug it into the green mouse port on the back of the computer.

2

If your keyboard has a USB port, you can connect your mouse to the keyboard instead of connecting it directly to your computer.

If you have a wireless mouse or keyboard, you may need to connect a Bluetooth dongle (USB adapter) to your computer. However, many computers have built-in Bluetooth, so an adapter may not be necessary.

Step 6

If you have external speakers or headphones, you can connect them to your computer’s audio port (either on the front or back of the computer case). Many computers have color-coded ports. Speakers or headphones connect to the green port, and microphones connect to the pink port. The blue port is the line in, which can be used with other types of devices.

plugging in the speakers

Some speakers, headphones, and microphones have USB connectors instead of the usual audio plug. These can be connected to any USB port. In addition, many computers have speakers or microphones built into the monitor.

Step 7

Locate the two power supply cables that came with your computer. Plug the first power supply cable into the back of the computer case and then into a surge protector. Then, using the other cable, connect the monitor to the surge protector.

3

You can also use an uninterruptable power supply (UPS), which acts as a surge protector and provides temporary power if there is a power outage.

Step 8

Finally, plug the surge protector into a wall outlet. You may also need to turn on the surge protector if it has a power switch.

4

If you don’t have a surge protector, you can plug the computer directly into the wall. However, this is not recommended because electrical surges can damage your computer.

Step 9

If you have a printer, scanner, webcam, or other peripherals, you can connect them at this point. Many peripherals are plug and play, which means they will be recognized by your computer as soon as they are plugged in.

a printer

Other peripherals may include software that needs to be installed before you can begin using them. Use the instructions included with the device to install it if necessary.

Generally, peripherals are optional, and you can add new ones at any time; you don’t have to add all peripherals during the initial setup of your computer.

GCF Learnfree

Advertisements

About Virtue IT Solutions

Professionals in IT
This entry was posted in IT Tips. Bookmark the permalink.

Leave a Comment: Use a valid e-mail Address

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s